OSAI offers complete systems for High Quality Cutting with plasma gases, on all metallic materials, consisting of extremely sophisticated electronic power sources capable to supply in continuous, 120A, 250A and 420A respectively, thus obtaining cuts on maximum thicknesses of 30, 60 and 80 mm with a quality up to range 2 according to the international reference standard ISO 9013.
Three HQC power sources of 120A, 250A and 420A are available.
Models 120A and 250A are multi-voltage power sources 220/230V-380/400V-415/440V at 50/60Hz. Model 420A is a multivoltage power source 380/400V-415/440V at 50/60 Hz. The 120A and 250A models have a built-in cooling unit with the power source, while for the model 420A the cooling unit is an external one.
The Automatic Gas Console allows to automatically control the cutting parameters and the gas flows adjustment, thus assuring the steadiness of the set pressures regardless of possible variations that could occur during the cutting process, allowing in this way to optimize the cutting quality and the consumables service life.
|165 – HQC||254 – HQC||420 – HQC|
|Three phase input||220/230V – 380/400V – 415/440V ±10%||380/400V – 415/440V ±10%|
|Input power||20.7 KVA 100%||51 KVA 100%||90 KVA 100%|
|Current adjustment range||5A ÷ 120A||5A ÷ 250A||5A ÷ 420A|
|Max Pierce (mm)||25||40||50|
|Max cut (mm – edge start)||30||60||80|
- CNC SYSTEMS
- HANDHELD PANELS
- DRIVES & MOTORS
- I/O MODULES