The new OPENdrive OD700 servo-drives product line perfectly matches the new OSAI CNC product family OPENcontrol improving the dynamic performances of the system and simplifying configurability and commissioning. OD700 are provided with EtherCAT fieldbus, have compact mechanical dimensions and support a wide ranges of operating currents and power supply voltages.
Six models are available with current ratings of 1A, 3A, 6A, 12A, 18A and 36A in three physical sizes. All models have the STO (Safe Torque Off) safety function, a redundant input with SIL3 certification, “cutting” the power of the servo-drive. When the STO function is active the machine is in a safe condition allowing the operator to intervene without removing the power to the machine tool.
XML Series Servomotors
Models belonging to this series, characterized by compact dimensions, all with a maximum speed of 3000 rpm and equipped with an incremental encoder 3000 ppr and optionally with a brake, have different characteristics according to their operating voltage, 230V or 400V, and to the stall torque ranging from 0,64 Nm to 15,9 Nm.
OS3 Series Servomotors
The OS3 motors are high voltage sinusoidal brushless motors, with low inertia and high dynamics. They can have an optional holding brake and include a thermal sensor. The position feedback is a resolver for CANopen servo-drives and SinCos 1024 pulses per revolution, also with Hiperface protocol, for OS-Wire drives. All motors have an IP65 protection level. The available standstill torques are from 0.2Nm up to 66Nm, with maximum speeds of 3000, 4000 and 6000 rpm and different numbers of poles (4 or 8) depending on the series. The motors can support high acceleration and deceleration up to 110.000rad/sec².
- CNC SYSTEMS
- HANDHELD PANELS
- DRIVES & MOTORS
- I/O MODULES